Portable Hardness Tester – D06

Main Page products portable hardness tester portable hardness tester - D06
«Hardness testing of materials, anywhere. Hardness testing during the purchase of raw materials, in the warehouse or production line, measuring hardness of large and heavy parts without moving them, curved or angled surfaces and internal surfaces of parts with a portable hardness tester»

Unique features

  • Auto-reload Impact Device mechanism
  • One hand test experience
  • Software user calibration
  • High accuracy in magnetic-radiated environments

Othe features

  • Run 3000 tests with fully-charged battery
  • Plug and play Impact Device
  • Auto Power off
  • USB port
  • With 1500 built-in memory
  • Same indentation energy in all directions
  • Hardness testing of 8 widely-used materials, i.e., LS, HS, GG, 3G, AL, BS,BG, and CU
  • Automatic conversion to Rockwell, Superficial Rockwell, Brinell, Vickers, Shore, and tensile strength
  • Hardness testing conversion using DIN 50150 and ASTM E140 standards
  • Automatic statistical calculation such as maximum, average, minimum, and range
  • Auto angle compensation function
سختی سنج پرتابل مدل D06

Technical specifications of Portable Hardness Tester-D06

  • Designed based on ASTM 956 standard
  • Graphic White on Blue LCD
  • With the accuracy of ±۰٫۵% in 750HL
  • Hardness range is from 200 to 900 lbs
  • ۱۱۰۰mAh/ 6V, 5×1.2V, AA Size battery
  • ۱A, 9V, DC charger
  • Having dimensions of 200x100x40mm and weight of 450g

Convertable hardness scales using Portable Hardness Tester-D06

SCALEHardness range
HLD300~900 HLD
HRA60~86 HRA
HRB41~105 HRB
HRC20~68 HRC
HRD40~77 HRD
HRF80~115 HRF
HR15N69~94 HR115N
HR30N41~85 HR30N
HR45N19~76 HR45N
HR15T74~93 HR15T
HR30T43~82 HR30T
HR45T13~72 HR45T
HV80~940 HB
HB76~620 HB
HSc33~98 HSc
MPa253~2204 HB

Impact device’s specification table

T3T2T1
Impact Body's weigh1.2gr5.5gr5.5gr
Impact energy0.0036J0.031J0.011J
Ball diameter2mm3mm3mm

Hardness range for metals, and hardness scales

NameSymbolHLDHBHVHRAHRBHRCHScMPa
Low alloy steelLS200-90076-62080-94060-8641-990-6833-98253-2204
High alloy steelHS200-90080-89820-68
Gray cast ironGG200-90093-334
Ductile iron3G200-900131-387
AluminiumAL200-90025-198
BrassBS200-90040-173
BronzeBZ200-90060-290
CopperCU200-90045-315
شارژر پرتابل

Charger

To charge the battery of the device in case required

قوطی گریس

Coupling paste

For coupling light and thin parts to a heavier base

Impact Device T1-T2

Standard Impact Device to run the test

Cleaning Brush

To clean the Impact Device based on instructions on manual

تست بلوک استاندارد سختی

Standard hardness test block

Having specific hardness to verify the device

Wrench

Used for Impact Device

هد مقعر

Concave support ring

Hardness test of concave surfaces with an approximate radius of 12mm

هد محدب

Convex support ring

Hardness test of convex surfaces with an approximate radius of 12mm

پرتابگر T3

Impact Device T3

Superficial or light pieces hardness testing

هد مقعر

Concave support ring

Hardness test of concave surfaces with an approximate radius of 12mm

هد محدب

Convex support ring

Hardness test of convex surfaces with an approximate radius of 12mm

تست بلوک استاندارد سختی

Hardness test block

Leeb hardness test blocks in various ranges

هد و پرتابه قیفی

Funnel head and Impact Body

Hardness testing of gearwheel’s indents

هد سختی سنجی مهره

Nut head

Hardness testing of nuts

هد سختی سنجی پیچ

Screw head

Hardness testing of screws

پرتابه T1

Impact Body

To get more information, our expert consultants are ready to answer your questions.

Similar products

محصولات